Annoying rattles

Discuss mechanical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
markthe45king
Minor Fan
Posts: 201
Joined: Thu Aug 06, 2009 11:20 am
MMOC Member: No

Annoying rattles

Post by markthe45king »

Ok i have potentially two annoying rattles:

One is the drivers door - the bottom curved hinge has worked loose from the gromit / rubber bit inside the door and is loose at the "body" end too - am i better taking the inner door panel out and refitting the rubber holder or is there a quicker fix?

Two is the bonnet catch cable, which appears to vibrate likea bugger against the brake servo which is fitted to the front right of the engine compartment - i guess it just needs tightening - but a quick look at ESM suggests 2 different spring options and at least one anti rattle joint - so does anyone know which is the right one? Obviously all i need to do is make the cable "tighter" so its not vibrating as much (and make sure there's a gromit where it comes through the bodywork into the car), but what are peoples thoughts on the best way?

i know these are really minor, but i want to get these sorted the most effective way rather than bodging them!
[sig]10256[/sig]
bmcecosse
Minor Maniac
Posts: 46561
Joined: Wed Feb 16, 2005 11:24 pm
Location: ML9
MMOC Member: No

Re: Annoying rattles

Post by bmcecosse »

Only two rattles ???????? Sure you are driving a Minor ? Tighten the door (but I don't get the rubber bit)?? And throw the servo away. Simples !
Bonnet on a standard Minor is released with a rod - not a cable ??
ImageImage
Image
markthe45king
Minor Fan
Posts: 201
Joined: Thu Aug 06, 2009 11:20 am
MMOC Member: No

Re: Annoying rattles

Post by markthe45king »

good point! ok - 2 really big rattles!! I can cope with the others.

I'm going to go back and look at the bonnet - mine looked a little floppy for a rod (you can fill your own jokes in there!) but you're probably right - and i do think it is that that is rattling.
[sig]10256[/sig]
mike.perry
Series MM Registrar
Posts: 10183
Joined: Sun Jul 24, 2005 11:39 pm
Location: Reading
MMOC Member: No

Re: Annoying rattles

Post by mike.perry »

The badges on the side of the bonnet can rattle if the fixings are not tight, as can the cross brace if the weld has broken.
[sig]3580[/sig]
DAVIDMCCULLOUGH
Minor Legend
Posts: 3010
Joined: Sun Sep 09, 2007 10:42 pm
Location: Whiteabbey, Co Antrim
MMOC Member: Yes

Re: Annoying rattles

Post by DAVIDMCCULLOUGH »

Here is the spring for the bonnet release

http://morrisminorspares.co.uk/shop/pro ... e457e3f56a

you may also need this if its not already on your release rod.

http://morrisminorspares.co.uk/shop/pro ... e457e3f56a

The other end of the spring fits into a wee hole at the top of the radiator support panel.


Do you mean that the check strap that stops the door blowing open to far is loose? The rubbers on it can break up so worth replacing these and you will need the door panel off to get at them.


Too many Minors so little time.....
markthe45king
Minor Fan
Posts: 201
Joined: Thu Aug 06, 2009 11:20 am
MMOC Member: No

Re: Annoying rattles

Post by markthe45king »

check strap - that's the puppy!

thank you so much - that would have annoyed me for a long time.
[sig]10256[/sig]
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Re: Annoying rattles

Post by MarkyB »

Now you can move on to the rattles that these were masking :)

"Once you break something you will see how it was put together"
Post Reply