aluminum thermostat hosing for a sidevalve later head

Post by **pgc520** » Mon Jan 02, 2012 7:27 pm

Does anyone have a photo of the Ali housing on the sidevalve engine, or better still one I could borrow to get some recast as they seem to be very hard to find. Thanks Andrew

Post by **TvdWerf** » Mon Jan 02, 2012 8:49 pm

You mean this one?[frame]

[/frame]
I can make more pictures, this is one from another position:[frame]

[/frame]

Post by **mike.perry** » Mon Jan 02, 2012 9:21 pm

Try John Vine at Minor Developments, he had them made for me, tel 01562 747718, or MMOC Club Spares

Post by **pgc520** » Sun Mar 04, 2012 8:56 pm

do you know what size bolts and the thread ?

Post by **mike.perry** » Sun Mar 04, 2012 10:26 pm

Should be M6 fine, same thread as the water pump/blanking plate, bottom hose/tap, and manifold. The heads shoud be 1/4 whit. but you may have to use whatever you can get. You may have to shorten the bolts or pack them with washers

Post by **oliver-morrisminor** » Tue Mar 20, 2012 10:18 am

ESM have these. I have just purchased one for a friend.

I think it was about 16.95 UK Pounds.

Morris Minor Owners Club

aluminum thermostat hosing for a sidevalve later head

aluminum thermostat hosing for a sidevalve later head

Re: aluminum thermostat hosing for a sidevalve later head

Re: aluminum thermostat hosing for a sidevalve later head

Re: aluminum thermostat hosing for a sidevalve later head

Re: aluminum thermostat hosing for a sidevalve later head

Re: aluminum thermostat hosing for a sidevalve later head