Ignition switch wiring

[Buzby58]

Hope someone can help me out as my google mojo has failed

I have a Lucas 4 pole ignition switch - turn to right to start and run, turn to left for aux power.

Looking at the back the terminals are numbered 1 to 4, number 3 being a single spade and the others double.

I'd be very grateful if someone could tell me which connects to what as I'm rapidly running out of fuses!

Thanks in advance

Grant

[bmcecosse]

Strange switch! In which position can you withdraw the key? Has it a spring loaded position for the starter?

[mike.perry]

Try the following - Minor 1000 switch
T1 - white/red - starter solenoid
T2 - white - ignition light
T3 - brown/blue - control box TA1

Alternatively
T1 - brown - starter solenoid junction box - alternator/dynamo (control box?)
T2 - white - fuse
T3 - white/red - starter solenoid
T4 - light green/white - radio (accessory)
Austin Maxi 1972. NB it was fitted with a pre engaged starter and no control box which may effect the wiring

[Buzby58]

Try the following - Minor 1000 switch
T1 - white/red - starter solenoid
T2 - white - ignition light
T3 - brown/blue - control box TA1

Many thanks - that worked a treat and I stuck the spare one on T4 so al is good again!

Cheers

Grant