69 Traveller Slow Restoration.

Discuss Bodywork problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
iandromiskin
Minor Fan
Posts: 475
Joined: Fri Jun 30, 2006 8:51 am
Location: Dromiskin, Co. Louth, Ireland
MMOC Member: No

69 Traveller Slow Restoration.

Post by iandromiskin »

I finally got down to taking off some more bits on my Traveller. I'd already taken out the interior and seen how bad the floor were so now it was the turn of the kickplates. At the moment I think I'm looking at having to replace basically everything underneath - both chassis legs, front cross member, centre crossmember, both front floor and probably some or all of the rear floors, both sills and the gear box member too and possibly one tie plate. So lots to do. Below you'll find some photos of progress or of rust so far.

Image

My shed with the Traveller in the middle and 62 Saloon on the right. Its a bit dusty and a nest of swallows have left their mark, hence the covers.


Image

My car. Looks nice on top (sort of) but a horror underneath (as usual).


Image

Right had kick plate removed to reveal a rather and expected rotton sill and lots of rust flakes.


Image

A small hole in the door post. Repairable ????


Image

Rotten rear floors and spring hanger.


Image

Rotten front floor and massively rotten centre cross member.


Image

One of two large holes in the right hand chassis leg.

More rust this time I think the gearbox member needs to be replaced. It doesn't look too good.


Image

On the plus side I did find the chassis plate (???) on the left hand side tie plate with is good. Mean anything to anybody ?


Image

I think the bottom of the drivers door may have been repaired at some point. At least I presume it has looking at this ?


Image

Does anyone know what this is ???? This is one of two odd looking things stuck to the inside of the drivers door and sort of looks like sealer but why ? Has the door been patched too ????


Image

The wood on the car is pretty ok but I did have to replace the rear doors. Is this door gap at the top of the door when closed too big ?? Its the best fit I could manage. (No door sealer has been fitted yet by the way).
Gertie, 1962 Saloon, Milly, 1969 Traveller (ex APL 971H) and now KAS 1958 4 Door Saloon.
[img]http://i156.photobucket.com/albums/t28/iandromiskin/DSC_0051-1.jpg[/img][img]http://i156.photobucket.com/albums/t28/iandromiskin/Picture112.jpg[/img][img]http://i156.photobucket.com/albums/t28/iandromiskin/Picture366.jpg[/img]

http://www.youtube.com/watch?v=WnDuQIOtYcc
http://www.youtube.com/watch?v=ZuhsoEd1GhQ
MarkyB
Minor Maniac
Posts: 7845
Joined: Thu Jan 25, 2007 3:18 pm
Location: South East London
MMOC Member: No

Post by MarkyB »

Does anyone know what this is ?
It looks like the bloke spraying sound deadening gloop was having a bad day or needed a refill.
I'd say this was original and went through the body shop at about 4.50pm on a Friday.
The plate on the engine bay floor says something about Nuffield and where the body was built. There is a recent thread about it.

A large hole is one you can get your hand into, have you seen some of the scary rot pictures on this site?
PSL184
Minor Legend
Posts: 4978
Joined: Thu Jul 03, 2008 5:49 pm
Location: Nuneaton
MMOC Member: No

Post by PSL184 »

"On the plus side I did find the chassis plate (???) on the left hand side tie plate with is good. Mean anything to anybody ? "

The number on the left side of the plate should match the tag on the top right of the bulkhead (as you look from the front)....
[sig]8426[/sig]

Compare the Minors - Simples !! http://mog.myfreeforum.org/index.php
Post Reply