Pic request

Post by **polo2k** » Sun Sep 07, 2008 11:51 pm

Hi all, Does anyone have a secret stash of pics deatiling the pickup cab and chassis.
Im looking to see the overall shape and proportions and also the cab overall, cab rear, cab to chassis mountings
Basically any pre-build, during build of pickups.

Im haveing some ideas and want to take a look to check things are feasable

Post by **morrisman1** » Mon Sep 08, 2008 12:23 pm

i have some, i can get dimentions for you aswell. ive been slowed to dialup speed for the month so i wont be uploading any untill im back up to speed, which will be in about three days.

Post by **bigginger** » Mon Sep 08, 2008 1:56 pm

I've got hundreds, but they're all about 100 miles away. I'll see what I have here though, and have a look for you when I'm back down south. There's quite a few on my blog too

Post by **polo2k** » Mon Sep 08, 2008 9:49 pm

dimentions aren`t too important at the moment, ive still got to figure out some ideas but the pics will help with that.

Post by **wibble_puppy** » Mon Sep 08, 2008 10:08 pm

you aren't all that far from me, polo, feel free to come over and study the van to your heart's content

wibble xx

Post by **bigginger** » Mon Sep 08, 2008 11:25 pm

Forgot - I'll have a rummage tomorrow

Post by **RussLCV** » Fri Sep 12, 2008 8:01 pm

Visit wwwminorlcvreg.co.uk and see photos pages of BMF

Post by **bigginger** » Fri Sep 12, 2008 10:11 pm

bigginger wrote:Forgot - I'll have a rummage tomorrow

Forgot again - as I say, there are quite a few on my blog

Post by **polo2k** » Sat Sep 13, 2008 4:28 pm

thankyou for all the help, things are looking doable.

The last time I bought a minor was 9 years ago and ive never really looked at an lcv in much depth (under the skin) but, if im looking for a pickup needing some work* then what should I expect to pay?
Im not looking for a show car as I would like to do a 'little' modifying.

*some work = condition/precence of wings/bonnet/drivetrain (possibly bed too) not important. general bodywork moderate condition, Chassis in reasonable condition
I.e. fairly rough but essentially solid.

Post by **bigginger** » Sat Sep 13, 2008 5:36 pm

If it's still got the original steel bed but no MOT, around £500, if with MOT but tatty around £1000-£1500. They do sometimes come up cheaper, but it would mean hunting/waiting.