Dizzy compatible?

Post by **Peetee** » Thu May 24, 2007 9:10 pm

To save me moving a mountain of junk to get at an engine can anyone tell me if the dizzy cap and rotor from a 1275 Ital can be swapped with that of a 1098 Minor?

Post by **aupickup** » Thu May 24, 2007 9:14 pm

if its from an ital, then the fixing clamp is different, but the 1098 used the same dizzy mount from a marina engine

Post by **Alec** » Thu May 24, 2007 9:25 pm

Hello Peetee,

I'm almost certain that they will not fit, the former is a 45D4 and the latter a 25D4 with different caps and rotors.

Alec

Post by **aupickup** » Thu May 24, 2007 9:34 pm

i meant that the dizzy from a marina has the same type of fixing plate.
the cap and rotor would make no difference as he wants to fit the whole dizzy fron an ital

Post by **bmcecosse** » Mon May 28, 2007 9:36 pm

But it won't fit a 1098 engine ! For some reason Leyland changed the whole arrangement - different drive shaft from the cam too.