Marina Wheels

Post by **Matt** » Wed Jan 17, 2007 12:41 am

My trav has all marina running gear and is currently running on the donor marina 13" rims. Has anyone got any idea what other cars used a 4.5" PCD and a 14" rim? Im not nessesarily looking for wider, but I want something that looks standard or similar!

The only other I can think of is MGB... anyone else got any ideas?

Post by **Packedup** » Wed Jan 17, 2007 2:20 am

Marina is 3.75, same as the Dolomite, surely?

Whereas MGB and Triumph 2000/ Stag are 4.5.

Montego and Maestro wheels should fit the Marina/ Dolomite PCD, as will some later Metros (Rover/ K series ones).

Post by **paulhumphries** » Wed Jan 17, 2007 8:09 am

Matt wrote:My trav has all marina running gear and is currently running on the donor marina 13" rims. Has anyone got any idea what other cars used a 4.5" PCD and a 14" rim?

Sounds like you have Marina van / pick-up axle and hubs to get 4.5" pcd.

Paul Humphries.

Post by **Matt** » Wed Jan 17, 2007 9:20 am

Well tbh I havent checked the PCD! I just thought marinas had the 4.5.. :s

Post by **custommartin** » Wed Jan 17, 2007 7:19 pm

paulhumphries wrote:
Matt wrote:My trav has all marina running gear and is currently running on the donor marina 13" rims. Has anyone got any idea what other cars used a 4.5" PCD and a 14" rim?
Sounds like you have Marina van / pick-up axle and hubs to get 4.5" pcd.

Paul Humphries.

Yep,

Only the Marina commercials had the 4.5 inch stud-spacing - if you have a set of those they are quite sort after (apparently!).

I have a pair of Morris Oxford wheels (For sale if anyone is interested??)
They are 4.5 inch p.c.d and will take the standard Minor hub-cap.

Cheers

Post by **tag60** » Thu Jan 18, 2007 10:55 pm

hi
does anyone no what other wheels apart from marina commercial will fit the 4.5 inch pcd as i have just puchased a set and was thinking about having the stud pcd done by esm or do i hold onto them as they are?
cheers david

Post by **Onne** » Thu Jan 18, 2007 10:57 pm

What setup have you got?

Standard Marina?

Post by **tag60** » Thu Jan 18, 2007 10:59 pm

standard minor

Post by **Onne** » Thu Jan 18, 2007 11:03 pm

Ooow ok, that is 4" PCD

You can get Minilites in 13" 14" and 15"

Van rims are wider, but quite dear

Post by **tag60** » Thu Jan 18, 2007 11:15 pm

thanks
will be fitting marina discs to front and the pcd of hubs are 4.5 inch would it be better to send hubs to esm and have them machined to minor pcd?
regards david

Post by **Onne** » Thu Jan 18, 2007 11:27 pm

Yes, I wwould if you want to retain the original look.

Post by **bmcecosse** » Fri Jan 19, 2007 7:38 am

Better to use hubs with the correct pcd in the first place!

Post by **minor_hickup** » Fri Jan 19, 2007 5:26 pm

Anyone know the PCD of Wolsey 1500 wheels, I've been offered a set which apparently look like minor wheels and are a tad wider.

Post by **plastic_orange** » Fri Jan 19, 2007 5:40 pm

Same pcd as minor - can't comment on width though.

Pete

Post by **Innovator** » Fri Jan 19, 2007 5:52 pm

4.5" PCD....Austin A60, Wolesley 16/60 etc, Reliant Scimiter, many Datsuns (inc 240Z 260Z ),Triumph Stag, 2000, Marina heavy weight van and pickup (ie no all commercials) and I think some of the landcrab Austins.

Post by **Packedup** » Fri Jan 19, 2007 7:59 pm

Rover 800 (and possibly 600) also have a 4.5" as far as I know, which most likely means Honda Prelude and Accords do too.

Post by **bmcecosse** » Fri Jan 19, 2007 11:07 pm

Are some of them not 5 stud ?

Post by **Onne** » Fri Jan 19, 2007 11:42 pm

Rover 800 is indeed 4x114.3 mm (4x4.5")
Ditto for 600/Prelude/Accord
Mitsubishi Galant
The offset is very different I fear though
On the cars above it is between 35 and 45

For 3.75" PCD I found the MGF to have the same (offset 18-30)

Onne

Post by **bmcecosse** » Sat Jan 20, 2007 12:45 pm

And therefore the later K series Metros too.

Post by **Onne** » Sat Jan 20, 2007 3:30 pm

very likely

Morris Minor Owners Club

Marina Wheels

Marina Wheels

Re: Marina Wheels

Re: Marina Wheels