door checks!

Post by **markattard** » Sat Jul 08, 2006 4:56 pm

Anyone please know the sequence of buffer-washers -grommets that goes in a 2 door Moggie? maybe some kind of diagram helpful?

Post by **les** » Sat Jul 08, 2006 10:28 pm

Put the rubber buffer on then the large washer then the nut. The rubber is there to absorb the shock so needs to be against the door.

Post by **markattard** » Mon Jul 10, 2006 8:41 am

thanks les

Post by **simmitc** » Mon Jul 10, 2006 1:03 pm

Note that there should be two nuts so that they lock together, just one may undo itself. Depending on the model, there may be one or two rubber buffers.

Post by **les** » Wed Jul 12, 2006 9:14 pm

There are two different lengths of door checks, could it be that two buffers were used on the longer check to make it 'shorter'