I have noticed that regardless of where I position the Heater Control that the heater is always blowing hot. I have checked and the cable is operating the valve ok. Does the valve need replacing, or is it servicable?
Thanks, Aaron
Heater Control Valve
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
-
- Minor Friendly
- Posts: 30
- Joined: Sun Jun 04, 2006 5:44 pm
- Location: Berkshire
- MMOC Member: No
-
- Moderator
- Posts: 7592
- Joined: Thu Feb 14, 2002 12:00 am
- Location: Watford, Hertfordshire.
- MMOC Member: No
Sounds like the valve has gone, there is not much you can do to it apart from some slight lubrication, you have checked that they cable is pulling the valve the whole way, check by seeing how far it moves with the cable then disconnect the cable and see if there is further movement as it may not be set properly.
Cheers
Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)
Herts Branch Member
Moderator MMOC 44706
Kevin
Lovejoy 1968 Smoke Grey Traveller (gone to a new home after13 years)
Herts Branch Member
Moderator MMOC 44706