Page 1 of 1
Marina Discs
Posted: Wed Jan 11, 2006 10:37 am
by pedro
Can anyone tell me the the part numbers of bearings to fit Marina hubs to Minor stub axles ?
Posted: Wed Jan 11, 2006 11:01 am
by Stig
Mine has Marina bearings with a turned adaptor to get the correct offset and match the thinner Minor stub axle to the bearing. It all came as part of the kit.
Posted: Wed Jan 11, 2006 2:01 pm
by simmitc
As Stig28 says, the spacer is supplied as part of the conversion kit. It should be possible to purchase from the various Minor traders. The bearings themselves are standard Marina units.
Posted: Thu Jan 12, 2006 7:11 am
by iwsmithy
Jonathan at JLH told me that some kits used the Marina stub axle fitted into the Minor susspension leg. If your leg has a stub axle with a castellated nut holding it in then you have a Marina stub axle in a Minor leg, if not then it must be the Minor leg with the sleeve. Either way you need standard marina bearings.