Page 1 of 1
Gearbox Ratios
Posted: Wed Oct 26, 2005 3:22 pm
by PeterCrowl
I've been trudging up and down the net looking for the ratios of the standard 4 speed gearbox ratios on the Minor 1000.
I've probably gone right past them..but not noticed.
Can anybody provide this information?
Thanks!
Peter
Posted: Wed Oct 26, 2005 3:32 pm
by Cam
Posted: Wed Oct 26, 2005 8:26 pm
by PeterCrowl
Fantastic!
Thank You!!
This is exactly what I was looking for.
Peter
Posted: Thu Oct 27, 2005 9:55 pm
by rayofleamington
It's a briliant page for info - I've just melted my brain trying to work out what aSII with 948 engine, a sII gearbox and a 4.22 diff should be capable of
It'll probably be fine when the 948 is tuned a bit, and maybe changing to a 1098 gearbox (as the SII has a low third so it feels like you missed a gear when changing to 4th!
)
But after looking at Cam's tables I'm wondering about going for a 4.55 diff
Ahhg - so many choices, so little time
Posted: Thu Oct 27, 2005 11:57 pm
by Cam
Ray (and others). Would a gear & diff ratio/rev/speed table be of use on that page?
Posted: Sat Oct 29, 2005 5:19 pm
by rayofleamington
Yeah - that sounds useful - e.g. vehicle speed at 4000 rpm
Posted: Sat Oct 29, 2005 5:50 pm
by Cam
Ok. I'll include a table when I get round to it then!
