Morris Minor Owners Club

I need to reset the quarter light glass in my Traveller.
Could someone please recommend a source for the rubber.
I have only found 3mm thick in my search, which is clearly too thick.

BobM

You can buy quantities and various thicknesses of Nitrile Rubber Sheet on ebay etc

Neoprene sheet would probably also be ok

Taupe

https://www.morrisminorspares.com/body- ... -h-p828248

Stephen

Stephen

I think he's refering to the Quarterlight glass rubber which holds the glass in the chrome frame.

But yes if its a quarterlight rubber that he needs...then ESM are good as are Baines and Andrew E, Ebay etc

Taupe

Assuming you're speaking of the glazing strip for the glass in the quarter light, have you tried the offering of the MGOC intended for MG models, AH Sprite etc?
https://www.ebay.co.uk/itm/255088005296

You could always contact them and ask what thickness it is....

Thanks . Yes it is the glazing strip for the glass to the stainless frame.
The MGOC offering looks promising. I shall order some and see how it goes.

Thanks BobM

Just done exactly this job using 5 × 9 × 11mm flat Rubber Edging Trim.

https://www.ebay.co.uk/itm/820245120671 ... 7054000583

It's snug but there again, you don't want it coming out easily.