Page 1 of 1

Engine Bay Smoke

Posted: Sat Sep 19, 2026 1:56 pm
by Wes
I've finally found where that wispy smoke is coming from. Its coming from out the end of this pipe on the nearside front of the engine. Whats this a symptom of?

Re: Engine Bay Smoke

Posted: Sat Sep 19, 2026 2:07 pm
by Biggles1957
That's the breather pipe.

Re: Engine Bay Smoke

Posted: Sat Sep 19, 2026 5:17 pm
by philthehill
Worn engine!!

Re: Engine Bay Smoke

Posted: Sat Sep 19, 2026 5:20 pm
by King Kenny
Blocked engine breather tubes will give rise to higher engine pressure and oil will find its way out somewhere.

Re: Engine Bay Smoke

Posted: Sat Sep 19, 2026 9:03 pm
by Wes
philthehill wrote: ↑Sat Sep 19, 2026 5:17 pm Worn engine!!
That what i was afraid someone would say :-(

Re: Engine Bay Smoke

Posted: Sat Sep 19, 2026 9:04 pm
by Wes
King Kenny wrote: ↑Sat Sep 19, 2026 5:20 pm Blocked engine breather tubes will give rise to higher engine pressure and oil will find its way out somewhere.
What breather tubes are these and how do i clear/clean out

Re: Engine Bay Smoke

Posted: Sat Sep 19, 2026 11:26 pm
by oliver90owner
Wes wrote: ↑Sat Sep 19, 2026 9:04 pm
King Kenny wrote: ↑Sat Sep 19, 2026 5:20 pm Blocked engine breather tubes will give rise to higher engine pressure and oil will find its way out somewhere.
What breather tubes are these and how do i clear/clean out
You don’t need to. It is obvious that it is clear and venting the crankcase pressure arising from the worn bores, pistons and/or piston rings. Later engines had engine breather systems which fed back into the engine inlet manifold by one route or another.

Re: Engine Bay Smoke

Posted: Sun Sep 20, 2026 10:32 am
by Wes
oliver90owner wrote: ↑Sat Sep 19, 2026 11:26 pm
Wes wrote: ↑Sat Sep 19, 2026 9:04 pm
King Kenny wrote: ↑Sat Sep 19, 2026 5:20 pm Blocked engine breather tubes will give rise to higher engine pressure and oil will find its way out somewhere.
What breather tubes are these and how do i clear/clean out
You don’t need to. It is obvious that it is clear and venting the crankcase pressure arising from the worn bores, pistons and/or piston rings. Later engines had engine breather systems which fed back into the engine inlet manifold by one route or another.
RIP original engine :-( :-(

Re: Engine Bay Smoke

Posted: Sun Sep 20, 2026 1:38 pm
by King Kenny
It costs nothing to look. Do the cheep checks first. Depending what system you have, it varies over the years. Mine has a rubber pipe from the rocker cover to the air filter.Oil was dripping everywhere and when I checked this pipe it was clogged. A new pipe cleared all the oil leaks. Check with your manual to find your breather pipes and see if they are clear. If they are OK you can move on to a more detailed search. I don't think you will need a new engine for something that might be a simple fix. Good luck.
PS.If the rings are shot you could get a set of Cord piston rings or the modern equivalent. I fitted a set 30 years ago and they are designed for worn cylinders without the need of a rebore.

Re: Engine Bay Smoke

Posted: Mon Sep 21, 2026 7:54 am
by Wes
King Kenny wrote: ↑Sun Sep 20, 2026 1:38 pm It costs nothing to look. Do the cheep checks first. Depending what system you have, it varies over the years. Mine has a rubber pipe from the rocker cover to the air filter.Oil was dripping everywhere and when I checked this pipe it was clogged. A new pipe cleared all the oil leaks. Check with your manual to find your breather pipes and see if they are clear. If they are OK you can move on to a more detailed search. I don't think you will need a new engine for something that might be a simple fix. Good luck.
PS.If the rings are shot you could get a set of Cord piston rings or the modern equivalent. I fitted a set 30 years ago and they are designed for worn cylinders without the need of a rebore.
Good call i'll check

Re: Engine Bay Smoke

Posted: Mon Sep 21, 2026 8:15 am
by Bill_qaz
A compression check is probably the best next step :tu1:

Re: Engine Bay Smoke

Posted: Mon Sep 21, 2026 1:45 pm
by Wes
King Kenny wrote: ↑Sun Sep 20, 2026 1:38 pm It costs nothing to look. Do the cheep checks first. Depending what system you have, it varies over the years. Mine has a rubber pipe from the rocker cover to the air filter.Oil was dripping everywhere and when I checked this pipe it was clogged. A new pipe cleared all the oil leaks. Check with your manual to find your breather pipes and see if they are clear. If they are OK you can move on to a more detailed search. I don't think you will need a new engine for something that might be a simple fix. Good luck.
PS.If the rings are shot you could get a set of Cord piston rings or the modern equivalent. I fitted a set 30 years ago and they are designed for worn cylinders without the need of a rebore.
Nipped to garage at lunchtime. Breather from Rocker cover to Filter complete free :-(

I'll check compression later. I did it recently and got some odd readings. So will do again, this time with throttle wide open.