Heater water control thread
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Heater water control thread
Inevitably I suppose after replacing the water valve on back of cylinder head I dropped one of the mounting nuts. Its not on the engine and not on the large piece of cardboard underneath. Its in the gravel! Anyone know what thread it is please?
-
stuffedpike20
- Minor Addict
- Posts: 888
- Joined: Thu Jul 26, 2018 7:40 pm
- MMOC Member: Yes
Re: Heater water control thread
Get a strong magnet and rake it through the gravel?
Re: Heater water control thread
8 with holes in tied up with string.! 
- svenedin
- Minor Legend
- Posts: 4870
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Heater water control thread
1/4" UNF
Stephen
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
myoldjalopy
- Minor Legend
- Posts: 3543
- Joined: Tue Jan 29, 2013 10:32 pm
- Location: Kernow
- MMOC Member: Yes
Re: Heater water control thread
Oh God, I hate it when this happens! Only the other day I dropped a trafficator mounting screw and it took bleddy ages to find it on the garage floor 
- svenedin
- Minor Legend
- Posts: 4870
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Heater water control thread
I dropped a BA nut weeks ago and I only found it on the drive yesterday. BA stuff is not stuff I keep much of a stock of but I did find an old one. I never throw the rusty ones away unless they’re ruined. When my coil fell off on the motorway last week I found the nut had fallen off the clamping screw. I even found a spare one of those in my bag of spares in the car. I am always dropping things. It gets annoying!
Stephen
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
- Bill_qaz
- Minor Legend
- Posts: 2341
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Heater water control thread
E clip from horn push last seen orbiting the interior, searched floors with magnet
no trace. Will probably find it one day when not looking for it
On modern cars it 10mm sockets
On modern cars it 10mm sockets
Regards Bill
- svenedin
- Minor Legend
- Posts: 4870
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Heater water control thread
These are quite large parts. My hobby used to be watchmaking. Now those parts really are difficult to find! They often go much further than anticipated or sometimes a much shorter distance. They're rarely where you think they ought to be. Bill, try down the back of the seat, under the seat, parcel shelf etc. A clever tool is a Bergen 7871 magic wiper: https://www.cousinsuk.com/product/magic-wiper-bergeon
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
- Bill_qaz
- Minor Legend
- Posts: 2341
- Joined: Fri Jan 14, 2022 7:31 pm
- Location: Oxfordshire
- MMOC Member: Yes
Re: Heater water control thread
One of the houses in my village when being refurbished they found clock parts that had gone through slots between floor boards. When the investigated the history it was the clock makers house. Its now named as clock housesvenedin wrote: ↑Tue Sep 01, 2026 7:36 pmThese are quite large parts. My hobby used to be watchmaking. Now those parts really are difficult to find! They often go much further than anticipated or sometimes a much shorter distance. They're rarely where you think they ought to be. Bill, try down the back of the seat, under the seat, parcel shelf etc. A clever tool is a Bergen 7871 magic wiper: https://www.cousinsuk.com/product/magic-wiper-bergeon
Stephen
Regards Bill
- svenedin
- Minor Legend
- Posts: 4870
- Joined: Fri Aug 29, 2014 9:27 am
- Location: Surrey
- MMOC Member: Yes
Re: Heater water control thread
Oh I have taken floorboards up before now to find parts!!! I once took the floorboards up to find my wedding ring but it was in my pocket the whole time........Bill_qaz wrote: ↑Tue Sep 01, 2026 7:51 pmOne of the houses in my village when being refurbished they found clock parts that had gone through slots between floor boards. When the investigated the history it was the clock makers house. Its now named as clock housesvenedin wrote: ↑Tue Sep 01, 2026 7:36 pmThese are quite large parts. My hobby used to be watchmaking. Now those parts really are difficult to find! They often go much further than anticipated or sometimes a much shorter distance. They're rarely where you think they ought to be. Bill, try down the back of the seat, under the seat, parcel shelf etc. A clever tool is a Bergen 7871 magic wiper: https://www.cousinsuk.com/product/magic-wiper-bergeon
Stephen![]()
Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.
Stephen
Stephen
-
bobtail4x4
- Minor Fan
- Posts: 107
- Joined: Wed Aug 20, 2025 8:29 pm
- Location: mid Yorkshire
- MMOC Member: Yes
Re: Heater water control thread
I bought a magnetic sweeping brush from ebay,
trouble is it also finds other lost things in the gravel, like nails I didnt know were lost,
trouble is it also finds other lost things in the gravel, like nails I didnt know were lost,
-
59Elva
- Minor Fan
- Posts: 169
- Joined: Fri May 15, 2026 2:59 pm
- Location: USA, upstate ny
- MMOC Member: No
Re: Heater water control thread
Better to find the nails in the gravel than in the tires.
Bill B. ‘59 Pickup USA