Series 2 horn tone adjustment

Discuss Electrical problems here.
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
Post Reply
jagnut66
Minor Legend
Posts: 3807
Joined: Fri Apr 11, 2008 7:28 pm
Location: Mansfield, Nottinghamshire.
MMOC Member: Yes

Series 2 horn tone adjustment

Post by jagnut66 »

Hi,
I was just wondering if the tone on the horn in my Series 2 can be adjusted (note higher / lower)?
Mine is the original brass nutted type.
The reason is simply that I like the tone of my Heralds horn and wondered if the tone of the one on my Morris could be altered nearer to it.
Thanks and best wishes,
Mike.
1954 Series 2: 4 door: "Sally" -- Back on the ground with (slave) wheels, being flatted, polished and put back together again, slowly......
1970 Triumph Herald 1200: "Hetty" -- Driven back from Llangollen in Wales (twice.....)
1952 Morris Minor MM highlight with sidevalve engine still fitted, wants work, so joins the queue for now......
User avatar
svenedin
Minor Legend
Posts: 4644
Joined: Fri Aug 29, 2014 9:27 am
Location: Surrey
MMOC Member: Yes

Re: Series 2 horn tone adjustment

Post by svenedin »

No you can't really adjust the frequency (pitch). You can adjust the character of the note slightly and also optimise it for loudness but the fundamental frequency is determined by the physical characteristics of the horn's design. The high tone and low tone horns operate at certain narrow frequency ranges. I forget the exact frequencies in Herz but it is in one of the Lucas workshop manuals.

If the horn sounds bad it is probably not operating properly. My car is later so I do not have experience of the earlier horns. I have successfully resurrected several Lucas 9H horns.

https://bristoloda.org/wp-content/uploa ... Repair.pdf

Stephen
1969 1098cc Convertible “Xavier” which I have owned since 1989.

Stephen
Post Reply