Page 1 of 1
Paintremoval
Posted: Wed Aug 24, 2005 4:57 pm
by wimor
Finally the car is completely disassembled. Now begin the big scratching of the coating and find out the rot parts of the body. After the repair of that I will remove the paint.
Who can give me tips about paintremoval? I think on a combination of sanding the big surface and sandblasting for the difficult accessible sections.
Greetings from Holland
Wimor
RE: Paintremoval
Posted: Wed Aug 24, 2005 6:50 pm
by rayofleamington
Hi - please can you put the signature photo on a non-security access site. I keep getting a logon box (and no picture)!
RE: Paintremoval
Posted: Wed Aug 24, 2005 7:19 pm
by bigginger
The quickest way is with an angle grinder and sanding disc/wire brush, but whoever's painting may object if you mark the metal, and you also remove factory primer/rust proofing. Guy (I think) recommended a car paint stripper, but I don't recall the maker.
Posted: Wed Aug 24, 2005 7:23 pm
by wimor
Hi Ray,
Sorry. It’s my first time that I publish a photo on the board. The problems begin after reduction of the photo. I have use a public web map. I must search according to the causing.
Greetings from Holland
Posted: Wed Aug 24, 2005 9:26 pm
by Onne
If you want Wimor, I can host one for you, and even explain in dutch if you want! Just send an email, or PM me