Page 1 of 1
Marina disks
Posted: Fri Aug 19, 2005 12:05 pm
by Matt
I have found a virtually complete marina in one of my local scrap yards (don't know what engine size, or anything else - didn't look). What parts would I have to remove to be able to use marina disks on the minor? and can I only use disks from a 1.3? (isn't the PCD also different?)
RE: Marina disks
Posted: Fri Aug 19, 2005 1:04 pm
by bmcecosse
PCD is different - so you either have to use the ghastly marina wheels - or spend loads on re-jigging the hub.
RE: Marina disks
Posted: Fri Aug 19, 2005 4:01 pm
by rayofleamington
If it is the 1.8 I'm still after a thermostat housing (different angle to the Minor...)
RE: Marina disks
Posted: Fri Aug 19, 2005 9:47 pm
by Matt
I will have a look next time I am there Ray, I had forgotton about that.... is there any way to tell? because it doesn't have any badges denoting size on the back
RE: Marina disks
Posted: Fri Aug 19, 2005 9:54 pm
by bmcecosse
The engine will be a give-away ! A series, or B series !
RE: Marina disks
Posted: Fri Aug 19, 2005 10:04 pm
by Matt
But there are 2 different size B series engines in the marina.
RE: Marina disks
Posted: Fri Aug 19, 2005 10:51 pm
by bmcecosse
Don't think so - just the 1800. There was a later 1700 - maybe in the Ital - but it wasn't really a B series.