Page 1 of 1

Identify Paint Finish

Posted: Tue Aug 19, 2025 4:21 pm
by Peted7202
I have a 1958 Morris Minor and I have completely stripped and repaired the floors/frame. The bodywork paint (Maroon) has scuffs and a few scratches that are through the paint. I'm undecided whether to repair those areas or to do a full respray. My problem is that I do not know what the paint finish is. I know they were originally painted in cellulose. I pretty sure it's been repainted sometime since then. How do I identify what the paint finish is?

Re: Identify Paint Finish

Posted: Tue Aug 19, 2025 5:54 pm
by svenedin
I believe you can scuff an area of paint with 400 grit paper and then test with a rag soaked in cellulose thinners. If the paint dissolves or softens it is cellulose paint.

Stephen

Re: Identify Paint Finish

Posted: Tue Aug 19, 2025 7:45 pm
by firedrake1942
If 1958 is the correct date and it is a UK produced vehicle, it is unlikely that it would originally have been Maroon (A or B). Maroon as not used on the Minor until October 1967.

Re: Identify Paint Finish

Posted: Fri Aug 22, 2025 10:08 am
by Peted7202
Thanks

Re: Identify Paint Finish

Posted: Fri Aug 22, 2025 1:18 pm
by philipkearney
If in any doubt as to what paint you have, you would be better to spray the panel first with a barcoat or other isolator. This seals the old paint and you can then overcoat with primer, topcoat etc with no risk of reactions from the old paint.

https://u-pol.com/product/coatings/spec ... -isolator/