Page 1 of 1

Rear view mirror

Posted: Tue May 13, 2025 4:37 pm
by Farvie
What size are the fittings for rear view mirror and sun visors.

Re: Rear view mirror

Posted: Tue May 13, 2025 7:07 pm
by geoberni
Farvie wrote: Tue May 13, 2025 4:37 pm What size are the fittings for rear view mirror and sun visors.
Tell us what the year the car is, as there's differences.
Are you just asking about screw size, or something more?

Re: Rear view mirror

Posted: Tue May 13, 2025 8:36 pm
by Farvie
Need screws, it's a 1958.
I've looked through all my bits and nothing fits.

Re: Rear view mirror

Posted: Wed May 14, 2025 11:40 am
by geoberni
The original Pt No was RTZ 805, which doesn't really help as often the old part numbers aren't recognised.
I did find an Australian Mini site which used that number for Mini headlamp ring, which on the Minor was AJA5081.
While the 7" headlamp trim was widely used across various models in those days; there really wasn't an economy of rationalised parts in those days... :roll:

You're basically looking for a small countersunk self tapper like this.

https://abingdonmgparts.co.uk/screw-chr ... -mm-rtc465
https://www.morrisminorspares.com/elect ... ew-p829797

Re: Rear view mirror

Posted: Wed May 14, 2025 12:30 pm
by svenedin
It will be an Imperial screw size which is probably why nothing you have fits.

Stephen

Re: Rear view mirror

Posted: Wed May 14, 2025 12:59 pm
by geoberni
svenedin wrote: Wed May 14, 2025 12:30 pm It will be an Imperial screw size which is probably why nothing you have fits.

Stephen
I think they were self tapper when fitted...

Re: Rear view mirror

Posted: Wed May 14, 2025 1:07 pm
by svenedin
geoberni wrote: Wed May 14, 2025 12:59 pm
svenedin wrote: Wed May 14, 2025 12:30 pm It will be an Imperial screw size which is probably why nothing you have fits.

Stephen
I think they were self tapper when fitted...
Yes they are but my experience of replacing screws here and there is that having a selection of Imperial sized screws (I use stainless steel) is the way to go. There are self tappers holding things to the bulkhead (control box, fuse box etc) and the head rail on the top of a convertible windscreen. Metric diameter screws are not an exact match.

Stephen

Re: Rear view mirror

Posted: Wed May 14, 2025 2:13 pm
by Farvie
Thanks again for all info guys,
I think I will buy a box of mixed ones.

Re: Rear view mirror

Posted: Wed May 14, 2025 4:38 pm
by Farvie
Found these, ones got to fit I hope

Re: Rear view mirror

Posted: Wed May 14, 2025 7:41 pm
by svenedin
If no luck, have a look through this section of the ESM website (which includes screws): https://www.morrisminorspares.com/body- ... s-trim-c38

Re: Rear view mirror

Posted: Wed May 14, 2025 8:37 pm
by Farvie
Many thanks 🙏