12G940 cylinder head with recessed exhaust valve seats to fit 1098.
Posted: Wed Jan 22, 2025 9:22 am
Hi, re advertising this head after it's been sitting on my shelf for a while.
It's a 12g940 which runs on 1098 blocks if the exhaust seats are recessed into the head with a standard cam.
It's a better head than the standard 12g202 on a 1098 - I ran it for years until I went for a 1275 with 266 cam etc.
So it's available and I will post at cost.
£125 plus p and p
It's a 12g940 which runs on 1098 blocks if the exhaust seats are recessed into the head with a standard cam.
It's a better head than the standard 12g202 on a 1098 - I ran it for years until I went for a 1275 with 266 cam etc.
So it's available and I will post at cost.
£125 plus p and p