Page 1 of 1
Minilite centres.
Posted: Fri Dec 27, 2024 8:11 pm
by Classiccars
To replace my centres do I just measure the circumference of the hole to know what to get. please
Re: Minilite centres.
Posted: Fri Dec 27, 2024 9:41 pm
by philthehill
Measure the internal diameter across the central hole. For example the centre hole in my Minilite replica wheel(s) (which are the same as you have) has a internal diameter of 63mm.
Re: Minilite centres.
Posted: Fri Dec 27, 2024 10:05 pm
by Classiccars
Will do thanks very much.
Re: Minilite centres.
Posted: Sun Dec 29, 2024 1:08 am
by oliver90owner
Easier to measure the diameter D and multiply by Pi to calculate the circumference (if you really ever needed it). 63mm might well be 2 1/2”. Not much difference between the two systems.
Re: Minilite centres.
Posted: Sun Dec 29, 2024 9:17 am
by Classiccars
Thank you.