Page 1 of 1
rockers and shaft interchange
Posted: Fri Dec 20, 2024 4:34 pm
by islecastle
Does anybody know if the pressed steel and cast steel rocker assemblies are interchangeable I have fitted a cast steel shaft completein place of the pressed steel type on my 1967 car and it looks ok. Swapped due to excessive wear on the pressed steel assembly.
Re: rockers and shaft interchange
Posted: Fri Dec 20, 2024 6:41 pm
by philthehill
The rocker shafts are all interchangeable.
The only proviso is that you ensure that the No: 1 rocker shaft support pillar has a hole for the transfer of oil from the head to the rocker shaft. The rocker shaft locking peg was latterly moved from No: 1 pillar to No:2 pillar which effected the oil transfer through the rocker shaft support pillar.
Re: rockers and shaft interchange
Posted: Fri Dec 20, 2024 7:45 pm
by islecastle
Thanks for that. I'll have to take it down again to make sure the oil feed is lined up.