Page 1 of 1

Engine number

Posted: Tue Jul 09, 2024 7:15 pm
by morris63
1971 Traveller.
Unfortunately had to remove the engine as it was worn out . The engine number is 10V/189E/H70069. (Seems quite a low engine number for a late engine)
I also had a spare engine which I decided to rebuild, which also had the engine number 10V/189E/H????? (The machinist removed and lost the plate, and I can’t remember the last numbers)
My question is,
• Does the 10V mean it was originally fitted to a Van?
• What does 189E stand for?
• Is it possible to remove the engine plate from my original engine, with out damaging it, and refit to the rebuilt engine, or can I get a new plate made?
Thanks for any help

Re: Engine number

Posted: Tue Jul 09, 2024 7:49 pm
by rocco

Re: Engine number

Posted: Tue Jul 09, 2024 8:15 pm
by geoberni
It depends on when the engine dates from. The Suffix to the V can get a bit confusing.

Part of the list will tell you that it denotes "Morris 1000 with van closed circuit breather"
Another part will tell you that the V is simply an inline engine, while H indicates a transverse...

The 189E indicates the vehicle type it was originally fitted to... However....

There is a small paragraph in Ray Newell's Original Morris Minor (p93) which simply states that...Cars from March 1969 had engines with a new numbering system, 10V-189-E - for cars fitted with Dynamos and 10V-190-E- for alternator cars...
So there you go.

The 'H' is High Compression engine.

Re: Engine number

Posted: Tue Jul 09, 2024 8:27 pm
by morris63
Thank you, that makes sence. Being a late car (1971) and fitted with a Dynamo Ray Newell may be correct. It did seem strange that a van engine would be fitted and I also had a van engine sitting in the garage for over 20 years. Not sure what a closed circuit breather is but both engines have the big breather coming out the side.

Re: Engine number

Posted: Wed Jul 10, 2024 9:26 am
by geoberni
"closed circuit breather" is one of the terms used for the PCV system where the Filler Cap is not vented and all fumes/venting from the engine are directed to the inlet manifold.
Very few late Minors had it, although svenedin has it on his car viewtopic.php?p=683671#p683671
It was principally on export vehicles to markets with high environmental regulation.

Re: Engine number

Posted: Wed Jul 10, 2024 5:49 pm
by morris63
Thanks. I don't have that.