Bleeding servo/disc set up.
Posted: Fri Jun 21, 2024 12:01 pm
Hi All,
Just converted to midget discs and new servo. tiny Seal removed from front of master cylinder.
Im not sure about the master cylinder. I see lots of fluid returning to the reservoir after the brakes are released, does that mean the seals are damaged inside?
I tried master cylinder outlet blanked off with a bleed nipple, its rock solid.
But when I connect things back to brake circuit, I cant seem to bleed brakes and occasionally pedal just pushes to floor?
Is that a symptom of bad master cylinder ?
Any help gratefully received
Thanks
Paul
Just converted to midget discs and new servo. tiny Seal removed from front of master cylinder.
Im not sure about the master cylinder. I see lots of fluid returning to the reservoir after the brakes are released, does that mean the seals are damaged inside?
I tried master cylinder outlet blanked off with a bleed nipple, its rock solid.
But when I connect things back to brake circuit, I cant seem to bleed brakes and occasionally pedal just pushes to floor?
Is that a symptom of bad master cylinder ?
Any help gratefully received
Thanks
Paul