Page 1 of 1
In bell housing there’s a hole at top others have
Posted: Thu Jun 06, 2024 9:32 pm
by Mercmancdi
Hi I minor bell housing the clutch arm comes out one side then other side option has a rubber plug in it there’s also a cut out at very top should there be a plug in this I assume there should but not sure. Help thanks.
Re: In bell housing there’s a hole at top others have
Posted: Thu Jun 06, 2024 9:41 pm
by philthehill
There should be a rubber bung fitted to the top bell housing hole.
https://www.moss-europe.co.uk/cover-gea ... soc=136450
Re: In bell housing there’s a hole at top others have
Posted: Thu Jun 06, 2024 10:04 pm
by Mercmancdi
Thank you I thought so I assume it’s same as rest.
I noticed it as engine is out and was cleaning battery box and saw dust falling through or probably never would have seen it.
Thank you. Appreciate it
Re: In bell housing there’s a hole at top others have
Posted: Fri Jun 14, 2024 11:33 pm
by Mercmancdi
Sorted it’s actually a different size.
Re: In bell housing there’s a hole at top others have
Posted: Sat Jun 15, 2024 9:17 am
by philthehill
Could you please enlarge your comment regarding the different size.
Is the hole in the bell housing too large or too small?
Is the bung for the hole in the bell housing too large or too small?
Is the bung in the link I posted above the right or wrong bung?
Re: In bell housing there’s a hole at top others have
Posted: Sat Jun 15, 2024 10:36 am
by Mercmancdi
The one you listed is correct thank you ,