Page 1 of 1
Flywheel locking tool.
Posted: Wed Feb 14, 2024 5:01 pm
by philthehill
Re: Flywheel locking tool.
Posted: Thu Feb 15, 2024 8:29 am
by Sleeper
Thanks Phil...
I know what my job is for this afternoon.
John ;-)
Re: Flywheel locking tool.
Posted: Thu Feb 15, 2024 11:59 am
by Sleeper
Sorted..
)
- stay.jpg (1.02 MiB) Viewed 1153 times
John ;-
Re: Flywheel locking tool.
Posted: Thu Feb 15, 2024 12:07 pm
by philthehill
That was quick
Well done.
This is what I use - Sykes Pickavant locking tool.
- Flywheel locking tool 1.jpg (81.02 KiB) Viewed 1147 times
- Flywheel locking tool 2.jpg (83.07 KiB) Viewed 1148 times
There is no need to use both bolt holes - once in place the turning motion of the flywheel tightens the locking tool to the flywheel. The use of one bolt also allows the locking tool to be easily swung out of place if need be.
I also have one of the early Sykes Pickavant flywheel locking tools (see below) as I am a sucker for collecting tools especially those I used way back when I was working in the BMC garage. I had to pay a bit more thane the £2.8.0 though.
- Flywheel locking tool.jpg (249.6 KiB) Viewed 1142 times
Re: Flywheel locking tool.
Posted: Thu Feb 15, 2024 1:21 pm
by Sleeper
You old bugger , we went decimal 50 years ago today..
John ;-)