Page 1 of 1

Rear brake part identification help

Posted: Sun Jan 28, 2024 10:39 pm
by Higgorama
Hi everyone,
This is my first post - I inherited a 1961 Traveller restoration project and am currently working to finish the brakes.
Can anyone tell me what the part in the picture is called, or share a link to buy? My car only has one attached to the driver's side rear wheel cylinder, and the rear brake line and bleeder screw connect to it and the Passenger side wheel has a red plastic plug in the cylinder where the part will go.
IMG_0248.jpeg
IMG_0248.jpeg (408.08 KiB) Viewed 786 times
Thanks,
Mike

Re: Rear brake part identification help

Posted: Mon Jan 29, 2024 7:45 am
by ManyMinors
You have outlined the rear brake banjo ESM part number RBK 119 (the brass part which the bleed nipple screws into) and the banjo connector ESM part number RBK 120 which the brake pipe screws into. Don't forget you'll also need the copper washers to seal the joints.
Good luck with your project!

Re: Rear brake part identification help

Posted: Mon Jan 29, 2024 7:48 am
by chrischris59

Re: Rear brake part identification help

Posted: Sun Feb 04, 2024 8:09 pm
by Higgorama
Thank you both - parts ordered!