Page 1 of 1
Lock-on grease coupler - any good?
Posted: Wed Jan 03, 2024 4:06 pm
by Oldmogman
This popped up on my Facebook page.
It looks good but I wondered if anyone had used one and could say whether it works and what the quality is like?
https://www.fanshome.co.uk/products/str ... 8404212031
Re: Lock-on grease coupler - any good?
Posted: Wed Jan 03, 2024 4:36 pm
by oliver90owner
Somehow I doubt it. But I am a cynic where marketing/advertising is concerned. A pic, mixing mm and cm, simply sounds alarm bells. (14 cm diameter?)
Re: Lock-on grease coupler - any good?
Posted: Wed Jan 03, 2024 5:11 pm
by philthehill
Re: Lock-on grease coupler - any good?
Posted: Wed Jan 03, 2024 7:36 pm
by svenedin
Yes. That's what I use and it is very good. I also use it in the bell tower. Lot of grease nipples on bell bearing and pulleys.
Stephen
Re: Lock-on grease coupler - any good?
Posted: Thu Jan 04, 2024 10:47 am
by olonas
"A single person can also complete the greasing, making your greasing job easy and fun. "
What's that all about? I don't require an assistant when using a grease gun with a push on connector.
Re: Lock-on grease coupler - any good?
Posted: Thu Jan 04, 2024 11:40 am
by svenedin
olonas wrote: ↑Thu Jan 04, 2024 10:47 am
"A single person can also complete the greasing, making your greasing job easy and fun. "
What's that all about? I don't require an assistant when using a grease gun with a push on connector.
No idea but I do find that with an ordinary nozzle and a rigid tube that quite often the connector does not lock on properly and grease just gets wasted everywhere.
Re: Lock-on grease coupler - any good?
Posted: Thu Jan 04, 2024 12:47 pm
by Sleeper
"A single person can also complete the greasing, making your greasing job easy and fun. "
I'll have to point this out to the Wife and see if she'll take the hint....
John ;-)