Morris Minor Owners Club

I'm trying to find a ' curvy' seal that sits between the door and quarter light frame edge.

I've spent hours trying to find the part but with no success. ( I'm having the doors spray painted and think it's a good time to replace the seals/ rubbers) while the window frame is out of the door.
Here's a few photos to help clarify.

(It's possible it was made to fit, as in cut and shaped to size. )

Have u asked esm spares they might be able to advise thay good anytime I have needed them hope u get it sorted

Is this diagram any help?

https://www.moss-europe.co.uk/shop-by-m ... 51-71.html

Stephen

Hello Stephen
Yes I did look at that diagram. It doesn't show that particular seal.

I think I can make one, will try anyway.

Hello Maria.
I haven't tried ESM.
Will give them ago. Trying to explain the little curvy seal is going to be a challenge in its self.
Thankyou.

The part required is item No: 34 in the above MOSS diagram Pt No: 140837.
This part has not been available from any sources for some considerable time..
This has been the subject of a previous thread which offered a solution to the non availability of Pt No: 140837.
viewtopic.php?p=680448&hilit=door+seal#p680448

Hello Phil
I did look through the threads but didn't see what I needed rather than wasting peoples time on answering.

I think I can make an alternative.
Very informative reply.
Thankyou

I used a bit of inner tube cut to fit.