Page 1 of 1
Rack damper pad
Posted: Wed Aug 23, 2023 8:09 am
by paul 300358
Has anyone got any idea of the diameter of the racks primary damper pad please.
Re: Rack damper pad
Posted: Fri Aug 25, 2023 9:20 am
by paul 300358
I just need an idea so that I can get the material before I remove the rack, I don't want to purchase bar which is way over size.
Re: Rack damper pad
Posted: Fri Aug 25, 2023 9:49 am
by les
15mm should cover it. I had to get one made, couldn’t find a supplier who stocked them.
Re: Rack damper pad
Posted: Fri Aug 25, 2023 9:57 am
by simmitc
The Service Parts List, plate MJ2 refers to the Pad Damper, ACA 5244, is this the part to which you refer?
Without removing the damper from a rack. you could get an idea of size by measuring the housing.
Re: Rack damper pad
Posted: Fri Aug 25, 2023 12:03 pm
by paul 300358
Thanks gents, I have some 15mm, it wont take long to make one.