Page 1 of 1
Tyre pressures
Posted: Sat Aug 12, 2023 12:39 pm
by CG75
Hi, I have a 1959 Traveller with radial tyres fitted. They are 145 R14 76S. Any ideas on what the tyre pressure should be? Thank you!
Re: Tyre pressures
Posted: Sat Aug 12, 2023 2:41 pm
by KeithL
We also run a 1959 Traveller on 145/80 R14 76T radial tyres. I'm not sure it quite answers your question but for what it's worth we run 28psi all round.
Re: Tyre pressures
Posted: Sat Aug 12, 2023 5:25 pm
by ManyMinors
I agree that 28psi should be fine but here is the info from the original BMC handbook.

- tyre pressures.JPG (104.93 KiB) Viewed 9469 times
Re: Tyre pressures
Posted: Sat Aug 12, 2023 5:34 pm
by CG75
KeithL wrote: ↑Sat Aug 12, 2023 2:41 pm
We also run a 1959 Traveller on 145/80 R14 76T radial tyres. I'm not sure it quite answers your question but for what it's worth we run 28psi all round.
I hope I am replying to you Keith…not sure how this works yet, but thank you!
Re: Tyre pressures
Posted: Sat Aug 12, 2023 5:34 pm
by CG75
ManyMinors wrote: ↑Sat Aug 12, 2023 5:25 pm
I agree that 28psi should be fine but here is the info from the original BMC handbook.tyre pressures.JPG
Thank you…that’s really helpful.
Re: Tyre pressures
Posted: Sat Aug 12, 2023 9:04 pm
by simmitc
Remember that the manual was written for crossply tyres, radials would be a little higher. I run two Travellers, 28 all round normal, 32 on rear when fully loaded or towing.
Re: Tyre pressures
Posted: Sun Aug 13, 2023 12:39 am
by ManyMinors
simmitc wrote: ↑Sat Aug 12, 2023 9:04 pm
Remember that the manual was written for crossply tyres, radials would be a little higher. I run two Travellers, 28 all round normal, 32 on rear when fully loaded or towing.
No, that is not the case. The drivers handbook specifically mentions radial tyres too which were available as an option

Re: Tyre pressures
Posted: Sun Aug 13, 2023 8:16 am
by simmitc
Fair point, I did not look at the image posted, only at the copy of the handbook I have on the desk, and that, being an early edition, quotes only cross ply.
Re: Tyre pressures
Posted: Sun Aug 13, 2023 9:34 am
by KeithL
simmitc wrote: ↑Sun Aug 13, 2023 8:16 am
..being an early edition, quotes only cross ply.
Mine doesn't either which is why I've always been a bit unsure of the pressures.