Page 1 of 1
Glove compartment screws for late Minor 1000
Posted: Tue Feb 07, 2023 4:57 pm
by rsawatson
In the process of disassembly I have unfortunately mislaid the two set screws which screw the driver's side glove compartment surround to the dashboard (see photo). Please could someone advise the screws I need to get hold of? I have checked suppliers and they do not seem to be listed.
- Glovebox.png (286.55 KiB) Viewed 3390 times
Thank you.
Re: Glove compartment screws for late Minor 1000
Posted: Tue Feb 07, 2023 5:39 pm
by svenedin
I believe they are 2BA machine screws. Mine are pan head, Phillips with a spring washer. I am not sure of the length. I could go and measure one.......
Measured: on my car they are 2BA 7/8th inch long. I cannot guarantee they are original but that fits although the screws don't actually need to be as long...
Stephen
Re: Glove compartment screws for late Minor 1000
Posted: Tue Feb 07, 2023 9:20 pm
by rsawatson
Thank you very much for your help. I really appreciate you checking and your reply.
Ryan
Re: Glove compartment screws for late Minor 1000
Posted: Tue Feb 07, 2023 9:43 pm
by svenedin
You’re welcome. I actually only had both gloveboxes out very recently to remove and overhaul the heater and to access wiring to install a new indicator stalk and hazard lights. I used those plastic boxes that takeaways come in and labelled them all so that I didn’t get in a muddle about what went were.
7/8ths is longer than needed if difficult to find. 3/4 would work or even shorter.