Rear brake shoe fault notification
Posted: Mon Jan 23, 2023 9:14 pm
Have recently attempted to change rear brake shoes on my ‘71 saloon.
I could not get enough adjustment on the new shoes.
After refitting several times and double checking I could still not get enough adjustment.
I finally put the old shoes back on and they adjusted fine.
Tried the new shoes one last time but same issue.
I then compared the old shoes to the new shoes and found that the new shoes were slightly smaller by a couple of mm thus reducing the overall diameter of the shoes when fitted and hence the issue with adjustment.
I called the supplier (ESM) this morning and they confirmed that they had identified an issue with a batch of shoes and would send me another set from a new batch. I have purchased many items from ESM and have found them to be an excellent supplier.
Just thought I’d share this info as I spent a while trying to work out what was wrong as you don’t expect the problem to be a new part.
I could not get enough adjustment on the new shoes.
After refitting several times and double checking I could still not get enough adjustment.
I finally put the old shoes back on and they adjusted fine.
Tried the new shoes one last time but same issue.
I then compared the old shoes to the new shoes and found that the new shoes were slightly smaller by a couple of mm thus reducing the overall diameter of the shoes when fitted and hence the issue with adjustment.
I called the supplier (ESM) this morning and they confirmed that they had identified an issue with a batch of shoes and would send me another set from a new batch. I have purchased many items from ESM and have found them to be an excellent supplier.
Just thought I’d share this info as I spent a while trying to work out what was wrong as you don’t expect the problem to be a new part.