fitting remote brake servo

[harrywright]

does anyone know where to get an adaptor for inlet manifold to fit a servo, this was going to be a winter project, to remove master cylinder at the same time and renew seals, but as i had to remove manifold as exhaust side had a small blow i decided to drill and tap inlet manifold and fit a plug so i can still use car, any info would be a great help.
thanks harry

[panky]

Something like this

https://www.ebay.co.uk/itm/354216584335 ... R_yGv6r0YA

or this one

https://www.ratsport.com/manifold-servo ... 2x12960126