Indicator cancelling
Posted: Mon May 09, 2022 8:41 pm
Been fixing the horn on ours today, basically the outer coumn had slipped down moving the horn contact below the slip ring. That and the missig circlip on the centre contact replaced and it all works well.
But one thing we did notice is the indicators should self cancel, a bit of research suggests there should be a square headed screw in the side of the inner column which catches on the fingers on the switch. Both fingers on the switch and the threaded hole in the column are all there but no screw. I can't find anywhere selling the screw or even a picture of it so I can see if I can make one anyone any ideas where I can get one?
But one thing we did notice is the indicators should self cancel, a bit of research suggests there should be a square headed screw in the side of the inner column which catches on the fingers on the switch. Both fingers on the switch and the threaded hole in the column are all there but no screw. I can't find anywhere selling the screw or even a picture of it so I can see if I can make one anyone any ideas where I can get one?