Page 1 of 1
Torque setting
Posted: Sat Apr 24, 2021 7:00 pm
by les
Can anyone tell me if there’s a torque setting for the set screws holding the Minor sump please ? I’ve spent a few hours refitting it with the engine in situ, a right game without a pit; laying on the floor.
Re: Torque setting
Posted: Sat Apr 24, 2021 7:10 pm
by ampwhu
midget manual says 6lb/ft
Re: Torque setting
Posted: Sat Apr 24, 2021 7:27 pm
by les
Ah, thanks for reply, that will suit the Minor fine.
Re: Torque setting
Posted: Sat Apr 24, 2021 7:45 pm
by geoberni
I concur with that, it's in the Minor Manual as the same.
Page 19 of the printed book, aka page General Data 13 Torque Wrench Settings.
I can't attach an image, the site is playing Silly Beggars again...
Error
The image file you tried to attach is invalid.
Re: Torque setting
Posted: Sat Apr 24, 2021 8:48 pm
by les
Working away from my manual unfortunately, hence the query, nice of you to confirm. Thanks to ampwhu I had time to finish the job this evening. Hope it doesn’t leak, not as easy as doing it on the bench.
Re: Torque setting
Posted: Thu May 27, 2021 7:54 pm
by Classiccars
There is one for me to look forward to.Cant wait