- Inner Step Sill.jpg (25.68 KiB) Viewed 1464 times
Your help much appreciated.
Cheers
Martin
Inner Step Sill/Floor Dimension Please
Forum rules
By using this site, you agree to our rules. Please see: Terms of Use
By using this site, you agree to our rules. Please see: Terms of Use
Inner Step Sill/Floor Dimension Please
Could someone please measure the Step Sill from where it meets the front inner wheel arch to where the floor starts to drop off above the cross member please - as in the picture above.
Your help much appreciated.
Cheers
Martin
Your help much appreciated.
Cheers
Martin
-
don58van
- Minor Addict
- Posts: 834
- Joined: Sun Feb 01, 2009 6:24 am
- Location: New South Wales, Australia
- MMOC Member: Yes
Re: Inner Step Sill/Floor Dimension Please
Hello Martin
I measured along the step sill inside the car from the base of the wheel dome/arch meets the floor and the step sill to the inflection point of the floor. I got 26" or 66cm. It that the dimension you want? This was a saloon where all the panels are original and not patched.
Don
I measured along the step sill inside the car from the base of the wheel dome/arch meets the floor and the step sill to the inflection point of the floor. I got 26" or 66cm. It that the dimension you want? This was a saloon where all the panels are original and not patched.
Don