Morris Minor Owners Club

Can anyone please provide images of the area around the boxing plate extension and rear arch flange as mine was completely rotted away. Just want to see the layout and where I'm going to weld. Thanks in anticipation.

This is the best I can find. The new boxing plate extension and floor sections are in position with the bottom of the wheel arch cut away. The wheel arch butts up to the BP extension and floor edge flanges and is welded in position



An earlier pic with the extension held in place with tech screws



How the new arch repair sits



Hope this helps

Thanks Panky!
I assume it'll be like this then??

Pretty sure the extension piece goes behind the wheel arch repair, it does on mine. You can see in my second picture with the original wheel arch in place and the extension screwed on that the flange of the wheel arch lines up with the outside of the extension.
If I'm wrong someone please shout out because mines all welded in now.

Just found this picture, not mine it's far to neat, and it shows the extension behind the wheel arch flange.....phew

Great stuff! Thanks Panky