Page 1 of 1

Rear brake cylinders

Posted: Fri Mar 12, 2021 9:20 pm
by ronnie
Hi. My rear brake cylinder is seized . Is it worth trying to strip it and fit a repair kit or renew cylinder. Any tips gratefully received
Ronnie

Re: Rear brake cylinders

Posted: Sat Mar 13, 2021 10:59 am
by simmitc
Always worth stripping and examining, but probably you will need a replacement cylinder - there is likely to be corrosion in the bore that will damage new seals, but you might be lucky. However, brakes are safety critical items, so do not "take a chance". Note that there are "genuine" or "original" cylinders and "pattern" (cheaper). Service kits are for the original type, not usually available for pattern. In my experience, the more expensive units fit better and with less effort.

Re: Rear brake cylinders

Posted: Sat Mar 13, 2021 11:54 am
by ronnie
Thanks. Probably best way to go. Cylinder looks very bright and new. Lack of use