Page 1 of 1
Which Part Am I Looking For?
Posted: Wed Jan 20, 2021 9:36 pm
by Bigrob
Evening all
Starting the panel shopping for the Panda, but there's something I'm not sure of.
The part of the rear quarter on which the rear wing bolts has rotten quite significantly.
- 20210116_132252.jpg (3.57 MiB) Viewed 2301 times
- 20210116_132257.jpg (3.16 MiB) Viewed 2301 times
This doesn't seem to be a part of the inner wing panel so is there another available?
Cheers all
Re: Which Part Am I Looking For?
Posted: Wed Jan 20, 2021 10:05 pm
by philthehill
Re: Which Part Am I Looking For?
Posted: Wed Jan 20, 2021 10:11 pm
by Bigrob
Perfect, thank you Phil.
I was hoping I didn't have to fabricate!
Re: Which Part Am I Looking For?
Posted: Thu Jan 21, 2021 11:14 am
by Rolomorris
Looking at the amount of rust it might be better to pay the extra £11 and obtain an extended wing mount flange from Morris Minor Centre Birmingham part REPO56A but watch out for the leaded joint just over half way round the wheel arch.
Re: Which Part Am I Looking For?
Posted: Thu Jan 21, 2021 1:28 pm
by philthehill
If you purchase the MMCBirmingham panel REP056A you will still need a repair panel to repair the rest of the wing attachment flange.
Re: Which Part Am I Looking For?
Posted: Thu Jan 21, 2021 2:07 pm
by Rolomorris
Having just purchased and fitted REPO56A it is complete and no need for any extra panel, if you view part REPO57A you will see an image for the left hand side. I indeed bought the wing flange repair from ESM before going for the extended version.
Re: Which Part Am I Looking For?
Posted: Thu Jan 21, 2021 2:34 pm
by philthehill
In that case the REP056A illustration is wrong/incomplete as it only shows the rear part of the flange repair panel.
Here is the link to REP056A
https://www.morrisminorcentrebham.co.uk ... 3a/rep056a
Phil
Re: Which Part Am I Looking For?
Posted: Thu Jan 21, 2021 10:25 pm
by Bigrob
Brilliant thank you both.
Although excuse my ignorance, but what's the difference between the 2 suggested parts?
Re: Which Part Am I Looking For?
Posted: Fri Jan 22, 2021 8:04 am
by philthehill
The MMCB wing flange repair panel has more metal so will compensate for additional rust damage to the original wing flange and surrounding body panels.
Re: Which Part Am I Looking For?
Posted: Fri Jan 22, 2021 8:23 am
by Murrayminor
I have a short video clip on you tube showing the repair I carried out on the same panel.
It may assist you.
https://www.youtube.com/watch?v=JNQXjWKsA9c
Re: Which Part Am I Looking For?
Posted: Fri Jan 22, 2021 11:36 am
by Bigrob
philthehill wrote: ↑Fri Jan 22, 2021 8:04 am
The MMCB wing flange repair panel has more metal so will compensate for additional rust damage to the original wing flange and surrounding body panels.
Perfect I'll get one of these then, thank you. I always prefer panels with more metal.
That's brilliant thank you. Your channel looks like it's going to be really helpful!