Page 1 of 1

Identify clock

Posted: Thu Oct 22, 2020 7:27 pm
by ian.mcdougall
Hi
Would anyone know what car this clock comes from.I was going to use it to make a Series MM clock clock, it is similar to a MO clock the other clock with it is a MO clock and has smaller windows in the base ans a shorter hand set cable . the face is quite attractive and i wonder if rare enough would it be better to sell as is to the right car owner or would it look out of place on a Series MM
Clock
Clock
DSC_5360 web.JPG (53.98 KiB) Viewed 1626 times
Window size MO clock to left
Window size MO clock to left
DSC_5361 web.JPG (48.33 KiB) Viewed 1626 times
Hand set cable Mo to left
Hand set cable Mo to left
DSC_5362 web.JPG (46.81 KiB) Viewed 1626 times

Re: Identify clock

Posted: Thu Oct 22, 2020 9:03 pm
by JOWETTJAVELIN
That is a late interior MO clock. They are not valuable.

Re: Identify clock

Posted: Fri Oct 23, 2020 9:34 am
by geoberni
Why does it look as though it has a pipe coming out of it? :-?

Re: Identify clock

Posted: Fri Oct 23, 2020 10:06 am
by ian.mcdougall
That is a cable to adjust the hands when it is mounted in the dash and would stick down under the dash

Re: Identify clock

Posted: Fri Oct 23, 2020 10:31 am
by geoberni
ian.mcdougall wrote: Fri Oct 23, 2020 10:06 am That is a cable to adjust the hands when it is mounted in the dash and would stick down under the dash
AhHa! Thanks.

Re: Identify clock

Posted: Fri Oct 23, 2020 7:48 pm
by alanworland
My dash clock didn't come from an MM but you would have to look hard to notice it wasn't genuine!
I think similar clocks were fitted to some BMC vehicles of similar vintage and believe that's where mine came from. I did some post's on it when it was installed.

Alan