Page 1 of 1
Propshaft Universal Joint......Sealed or Not ?
Posted: Wed Sep 16, 2020 5:52 pm
by pgp001
Should I go for this one......
https://www.moss-europe.co.uk/universal ... soc=136346
Or this one......
https://www.moss-europe.co.uk/universal ... soc=136348
Any one got an opinion, or first hand experience please.
Phil P
Re: Propshaft Universal Joint......Sealed or Not ?
Posted: Wed Sep 16, 2020 6:10 pm
by philthehill
Out of the two I would go for the one with grease nipple.
You can never have too much grease in a U/J.
When greasing the U/J if you see grease expelling past the bearing seal(s) - stop or you can displace the seal which will let crud into the joint.
Re: Propshaft Universal Joint......Sealed or Not ?
Posted: Wed Sep 16, 2020 7:26 pm
by pgp001
Cheers Phil
I was not aware of the sealed type until I started looking today, I will stick with the grease nipple type.
Phil P
Re: Propshaft Universal Joint......Sealed or Not ?
Posted: Wed Sep 16, 2020 7:37 pm
by geoberni
philthehill wrote: ↑Wed Sep 16, 2020 6:10 pm
You can never have too much grease in a U/J.
When greasing the U/J if you see grease expelling past the bearing seal(s) - stop or you can displace the seal which will let crud into the joint.
Ummm, sounds contradictory, but I know what you mean...
