Morris Minor Owners Club

Promoting the Preservation and Use of the Postwar Morris Minor
https://board.mmoc.org.uk/

Shock absorber seals

https://board.mmoc.org.uk/viewtopic.php?t=72471

Page 1 of 1

Shock absorber seals

Posted: Thu Aug 06, 2020 6:16 pm
by Garyjohndavies
Does any body know what seals l need to refill my shock absorbers with new oil ?
They look like ,copper crush washers ,but not sure . Is the filler washer the same as the drain / valve ?

Gary

Re: Shock absorber seals

Posted: Fri Aug 07, 2020 12:40 pm
by Declan_Burns
Gary,
The thread on the filler plug is 5/16" x 26 BSB. A copper crush washer 8mmID will fit. I have used fibre washers 8x14x1.5mm without any issues. I fitted reservoirs on my front dampers for inspection and filling purposes.
Regards
Declan
All times are UTC+01:00
Page 1 of 1

Powered by phpBB® Forum Software © phpBB Limited