Page 1 of 1
ignition light
Posted: Thu Jun 18, 2020 1:57 pm
by Sidthevid
Hi , i am new her but looking for some help, i have recently changed to electronic ignition on my 63 2 door moggie,and alternator, followed all wiring diagrams off here and google,everything seems to be OK , and the alternator is charging the battery,checked via multi metre but the ignition switch light on the clock is still glowing red,i have attached more grounding straps, as to help the negative earth, any suggestions ??????????, its probably something simple but i am at a loss????
Re: ignition light
Posted: Thu Jun 18, 2020 5:58 pm
by jagnut66
Hi,
I converted to an alternator recently too, however I didn't rate the alternator wiring 'as supplied'. One large brown and two extremely skinny ones that didn't look up to much at all.
So I rewired / soldered the alternator connection plug, retaining the large brown but dispensing with the skinny ones and reusing the main loom wiring, as described in the instructions available on here, see below:
viewtopic.php?f=11&t=71948
I was wondering if in using the kit 'as supplied' you missed reconnecting a wire?
Best wishes,
Mike.
- Alternator wiring.JPG (1.25 MiB) Viewed 516 times