Page 1 of 1
Starter motor
Posted: Wed Jun 03, 2020 8:45 am
by Propshaft
Hi. I have just swapped the starter motor for what I thought was a like for like starter motor the fresh one I have fitted does not except the nuts for the cable fixing I have tried every conceivable nut I have but non fit it looks like 24 tpi and just under 7 mm diameter any suggestions. Thanks
Re: Starter motor
Posted: Wed Jun 03, 2020 10:36 am
by philthehill
Have you put a thread gauge on the threads?
If we know the TPI (imperial) or pitch Metric) the thread can be easily identified.
Re: Starter motor
Posted: Thu Jun 04, 2020 5:27 pm
by Propshaft
Hi checked the stud it 25 tpi and .264 diameter. Metric also works as 1.0 thread and 6.82 diameter . I have now put my spare starter motor on so all is good . When I get a nut for the other that will be relegated to the spare