Page 1 of 1
Photo size
Posted: Thu May 28, 2020 12:37 pm
by philthehill
Question - has the photo size limit changed? I have been trying to post photos that have been easily posted before and will not now be accepted even though I have resized then down to near impossible to see.
Phil
Re: Photo size
Posted: Thu May 28, 2020 12:45 pm
by Murrayminor
Photo test
Re: Photo size
Posted: Thu May 28, 2020 12:46 pm
by Murrayminor
The above was supposed to show a picture so obviously something has changed, I used the usual method of uploading a picture but it failed.
Re: Photo size
Posted: Thu May 28, 2020 12:47 pm
by geoberni
HI Phil
I've just tried a couple of photos from my PC and same problem.
It must be the Forum Gremlins again.
Nothing's adding, either using Drag n'Drop, nor with 'Add Files' right down to a couple of hundred kb file size.
Error Message:
Error
Could not upload attachment to ./files/38183_c49eaa90fafe11bc5a40b35060047238.
Re: Photo size
Posted: Thu May 28, 2020 12:50 pm
by philthehill
Thanks for the above.
I have been tearing my hair out trying to get the photos to be accepted with no luck.
I may try again later.
Phil
Re: Photo size
Posted: Thu May 28, 2020 3:55 pm
by les
I’m curious,

- 97FFCA6D-3AA3-42D2-A821-AF442C8EBDE4.jpeg (378.85 KiB) Viewed 1067 times
This is 379kb
Re: Photo size
Posted: Thu May 28, 2020 3:58 pm
by les
1.8Mb
Re: Photo size
Posted: Thu May 28, 2020 3:59 pm
by philthehill
Test picture

- 100_2629 (2).JPG (160.66 KiB) Viewed 1063 times
Something must have happened as the above picture would not earlier be accepted as it kept showing as not acceptable/too large.
Several others which I had posted on here were not acceptable either.
Well at least something works now.
Thanks to all for the above input.
Phil
Re: Photo size
Posted: Thu May 28, 2020 4:18 pm
by geoberni
I won't bother actually leaving it here, but I just got a 4Mb image to load and preview.
The Gremlins have clearly gone to bed for a while, before coming back to get us when we're not expecting them...
Re: Photo size
Posted: Thu May 28, 2020 4:23 pm
by les
Now things appear ok, I tried to remove my test posts but can’t.