Page 1 of 1

Throttle linkeage

Posted: Mon May 25, 2020 9:10 pm
by dudload
More questions related to this poorly maintained Morris I've purchased!

Whilst trying to find why the car is puffing out black smoke from the exhaust I found that the throttle linkage is very worn to the point of failure.

I've attached a link below, anyone know what parts I should get here? Normally good with an exploded diagram but struggling her for some reason

https://youtu.be/BMD3rKIac4s

Re: Throttle linkeage

Posted: Mon May 25, 2020 9:42 pm
by philthehill
The part shown in the you tube video is this:-

https://www.morrisminorspares.com/fuel- ... 89-p830687 (NCA)

https://www.moss-europe.co.uk/catalogse ... &q=ACA5289

It is never a tight fit in the carb butterfly operating lever. So long as the cable is not worn and you can get a fully open throttle you will be ok.
You can tighten the fit in the arm by placing a suitable washer(s) between the split pin and lever.