Morris Minor Owners Club

I am contemplating taking out the glass in the quarter Light from its surround Esm do not supply the rubber gasket for refiting it in the frame what do we recommend

Use some car inner tube or reuse the old one if you cant find a new replacement... use some waxoyle to lubricate whilst refitting NOT wash up liquid...

Taupe

I've been looking for pictures for when I did the same. Good glass fitted to stainless surround.

Rather than forcing solid rubber anywhere, I used tiger-seal/sikaflex/mirrormate type stuff. Much easier. If I can get the pictures across, you'll see them below. If doing the same again, I'd use a black rather than white gloop.

So, with a clean glass and surround, gunk up the groove, push in glass, clean back overspill while wet, a stanley blade and those industrial wet wipes work wonders. Voila made to measure rubber gasket.

Removing old glass

Repairing corroded spigot with Epoxy - since it's out anyway

The main event

Paint it black


Refitted

Thanks for the info and pictures was wondering about black tiger seal , I will now get on with removing glass from frame