Page 1 of 1
bolt sizes?
Posted: Fri Apr 03, 2020 5:42 pm
by stuupnorth
hi guys
looking for the bolt sizes as ringed on picture oil filter and alternator /dynamo
- s-l1600 1.jpg (107.82 KiB) Viewed 489 times
Re: bolt sizes?
Posted: Fri Apr 03, 2020 5:55 pm
by philthehill
The bolts for the alternator/dynamo bracket are 5/16" x 11/16" UNF.
As regards securing the oil filter head you can have either 3/8" UNC studs with 3/8" UNF threaded outer ends with 3/8" UNF nuts or 3/8" UNC bolts.
With both types of filter head fastenings the threads in the block are 3/8" UNC.
The length of the filter head stud/bolt will depend upon the filter head fitted.
Here is the link to the MOSS Midget site which has the various types of oil filter head with mounting bolts/studs:-
https://www.moss-europe.co.uk/shop-by-m ... 58-66.html
Re: bolt sizes?
Posted: Fri Apr 03, 2020 6:25 pm
by stuupnorth
many thanks
