Page 1 of 1
ESM servo instructions
Posted: Thu Mar 19, 2020 7:13 pm
by Carty
Hi All
Long story short, I’ve lost the instructions to fit my servo. ESM sent me a diagram for the pipe work but could do with some instructions for the fitting. Any help, photos etc would be great. Many thanks
Re: ESM servo instructions
Posted: Thu Mar 19, 2020 8:14 pm
by paul 300358
This was originally done by Declan Burns
Re: ESM servo instructions
Posted: Thu Mar 19, 2020 8:16 pm
by paul 300358
Sorry, I can only do one at a time!
Re: ESM servo instructions
Posted: Thu Mar 19, 2020 8:20 pm
by paul 300358
Is it possible to add a PDF file? Or can you PM me your email address and I will send the Lockheed fitting instructions.
Re: ESM servo instructions
Posted: Sat Mar 21, 2020 3:22 pm
by Carty
Very many thanks for this. Just one more question, do you mount it on the bulk head?
Re: ESM servo instructions
Posted: Sat Mar 21, 2020 4:17 pm
by paul 300358
Mine is mounted on the drivers side engine bay tie plate. I think that this will mean removing the distributor when I need to remove the starter motor. I have also seen one mounted under the drivers seat. Try to avoid anywhere that may get hot (near the exhaust).